|
3/26/2012 12:16:59 PM
|
topic:
Export STEP and parasolid
perfect
Posts 1
|
Good afternoon staff
I have here a duvidade. In version KC2010 that and still have the test I am not able to import or export files in STEP and Parasolido
|
|
1/29/2012 10:56:14 PM
|
topic:
Expotring individual layouts to DWG
tdw123456
Posts 2
|
I've been using Some form of Kubotek since Cadkey 3.1 but I've never been able to figure out how to write a good KXL.
I'm currently using KC 6.5, and translation from layout mode to .dwg is never good enough unless I follow the steps listed below;
Autoscale the layout
burst the layout
Export to DWG (ACAD 200) using the preset export options
(make the file name of the exported file the same as the Layout title)
undo (to reverse the burst operation)
end
Can anyone help with this macro?
|
|
1/25/2012 1:55:50 PM
|
topic:
Need a special dwg export macro
tdw123456
Posts 2
|
I'm using KC6.5 and if I export from a layout to .dwg and get good repeatable results I have to;
burst the layout
export to .dwg
type a file name
escape
when back at KC6.5, undo the burst operation to retain associativity
I've tried creating a KXL to do this but it gets stuck after bursting the layout.
(see attached KXL file)
Can anyone help me with this?
|
|
1/13/2011 3:20:29 AM
|
topic:
Exporting to DXF or DWG
gehlmauer
Posts 1
|
DXF was originally introduced in December 1982 as part of AutoCAD 1.0, and was intended to provide an exact representation of the data in the AutoCAD native file format, DWG (Drawing), for which Autodesk for many years did not publish specifications.
________________
http://www.downloadvlcplayer.org/download
|
|
4/10/2010 12:50:32 PM
|
topic:
Import ckd files multiple times like the CADKEY
kesjeff
Posts 1
|
I want to be able to import old cadkey ptns multiple times but when I build a KXL file it kicks out and won't let me import them.
This is the code from the old macro CDL file that we used. I would be able to open the PTN then place like a 2D pattern and keep putting it in until I escaped out of the command. I have a bunch but once I get the first one done I can do the rest.
uMACSTART
dFILE 0, `C:/CADKEY98/Ptn/`, `38bolt.ptn`, `C:/CADKEY98/Ptn/38bolt.ptn`
dYESNO 13, 0
eMENU 2305, 1
eDBL1 519, 1.000000
eDBL1 519, 0.000000
ePOS 2306, 2305, -999, 7.553585, 8.920721, 0.000000
rIMPPTN
uMACEND
Thanks,
Jeff Kes
|
|
3/13/2010 6:19:42 AM
|
topic:
Question on Kc 7.5.2
jack
Posts 5
|
Hi,
Could you please suggest me how i will go to work a single file ( 150 MB ) with muti users in networking..Is it possible in kc 7.5.2..and how will save the file...
Regards
Jack
|
|
2/2/2010 5:59:44 AM
|
topic:
question on kc
CKDExpert
Posts 128
|
Jack,
No, KC will not save as a lower version level.
|
|
2/2/2010 4:39:52 AM
|
topic:
question on kc
jack
Posts 5
|
Hello,
Is it possible to save the ckd file to higher to lower version...8.5.1 to 7.5.2 or when the higher version file is it possible to open in lower version....
|
|
12/29/2009 12:28:38 AM
|
topic:
Surface Modelling for a complex shape
jack
Posts 5
|
Hi,
Please upload a surface modelling tutorial,i need to know how to create a form punch from a strip layout ( Surface Modelling )...I am using KC 7.5.2
Regards
Jack
edited by jack on 12/29/2009
|
|
12/1/2009 7:34:48 AM
|
topic:
Test
CKDExpert
Posts 128
|
And here is a reply test
|
|
11/21/2009 6:20:27 AM
|
topic:
question on kc
jack
Posts 5
|
Hello Sir,
i need to create a complex solid ( tool form die & punch ) by using strip surfaces...can you send a video file how to create a surface from solid ( Complex shapes ) id : jack_635647@hotmail.com..i am using kc 7.5.2....
thanks
Regards
jack
|
|
7/24/2009 6:36:50 AM
|
topic:
Keycreator
CKDExpert
Posts 128
|
Jack,
Can you be a little more speciafic on the details?
What version of KeyCreator are you using?
As far as the details you provided:
1. Unstitch the face from the solid
2. Stitch the new face back to the solid.
|
|
7/23/2009 1:14:14 AM
|
topic:
Keycreator
jack
Posts 5
|
Can you please explain how to replace the faces by using surfaces in a block.
Regards
Jack
|
|
6/4/2009 7:39:20 AM
|
topic:
cadkey the best for me.
osca
Posts 31
|
GM -HHR
FORD Mustang cabriore.
A part of these project ,around 2002,I have joined for development as designer and it was my most splendid time , cause I could spend my life in my dreamed coutry and at detroit for working in my expert field. with cadkey in my notebook by igs...
Cheer up USA , i will visit again .. please call me to your country project.
OSCA always pray and believe the survaival american automotives .
I love japanese motorcaylce and world car ,motorcycle.
|
|
5/30/2009 6:19:05 AM
|
topic:
cadkey the best for me.
osca
Posts 31
|
The pen type mouse as for cad inputing devidce .
I-pen total cost to tokyo was 40us$ found in ebay.
after trying few creating elemnts , I have returned to normal 3 button mouse in result. phaaaaw silly expence.
|
|
5/17/2009 5:33:27 AM
|
topic:
cadkey the best for me.
osca
Posts 31
|
recently , I changed monitor to 26in only costed 400us$, is wide and good.
now I rounded angle of the monitor 90 degree, I think it s better for me to cadkey usage especially to develop motorcycle . Goood feeling. the movement of my eyes from top to bottom is healthy than horizontal direction....
ati video software was updated to this .
|
|
4/18/2009 2:29:08 AM
|
topic:
Site Changes
soli_st
Posts 1
|
The previous site had a very good feature:
Possibility to see the newer uploaded utilities in an additional section
different from actual sections as Keycreator 7, Keycreator 8 etc.
Solomon
|
|
4/1/2009 6:35:26 AM
|
topic:
Menu buttons in Cadkey 19
CKDExpert
Posts 128
|
Osca,
If I remember correctly, the button size is directly related to the font size in windows.
So try changing the default windows font size and see if that changes the font/button size in cadkey.
|
|
3/31/2009 10:51:56 PM
|
topic:
Menu buttons in Cadkey 19
osca
Posts 31
|
I tried to make bigger the font in cadkey menu.
By the reason of some program source, I could not change the size.
|
|
3/24/2009 7:04:23 AM
|
topic:
Involute cdl
osca
Posts 31
|
I agree too !
|
|
pages:
1 2
|