Geometric Technologies - Recent Posts http://www.geotrictech.com/forum/recent.aspx Geometric Technologies - Recent Posts en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Sat, 10 Apr 2010 12:50:32 GMT Sat, 10 Apr 2010 12:50:32 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=838 Message from kesjeff
This is the code from the old macro CDL file that we used. I would be able to open the PTN then place like a 2D pattern and keep putting it in until I escaped out of the command. I have a bunch but once I get the first one done I can do the rest.

uMACSTART

dFILE 0, `C:/CADKEY98/Ptn/`, `38bolt.ptn`, `C:/CADKEY98/Ptn/38bolt.ptn`
dYESNO 13, 0
eMENU 2305, 1
eDBL1 519, 1.000000
eDBL1 519, 0.000000
ePOS 2306, 2305, -999, 7.553585, 8.920721, 0.000000
rIMPPTN

uMACEND

Thanks,
Jeff Kes]]> Sat, 10 Apr 2010 12:50:32 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=837 Message from jack
Could you please suggest me how i will go to work a single file ( 150 MB ) with muti users in networking..Is it possible in kc 7.5.2..and how will save the file...

Regards
Jack]]> Sat, 13 Mar 2010 06:19:42 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=836 Message from CKDExpert No, KC will not save as a lower version level.]]> Tue, 02 Feb 2010 05:59:44 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=836 Message from jack Is it possible to save the ckd file to higher to lower version...8.5.1 to 7.5.2 or when the higher version file is it possible to open in lower version....]]> Tue, 02 Feb 2010 04:39:52 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=835 Message from jack
Please upload a surface modelling tutorial,i need to know how to create a form punch from a strip layout ( Surface Modelling )...I am using KC 7.5.2

Regards
Jack
edited by jack on 12/29/2009]]> Tue, 29 Dec 2009 00:28:38 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=367 Message from CKDExpert Tue, 01 Dec 2009 07:34:48 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=834 Message from jack
i need to create a complex solid ( tool form die & punch ) by using strip surfaces...can you send a video file how to create a surface from solid ( Complex shapes ) id : jack_635647@hotmail.com..i am using kc 7.5.2....

thanks

Regards
jack]]> Sat, 21 Nov 2009 06:20:27 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=833 Message from CKDExpert Can you be a little more speciafic on the details?
What version of KeyCreator are you using?

As far as the details you provided:
1. Unstitch the face from the solid
2. Stitch the new face back to the solid.]]> Fri, 24 Jul 2009 06:36:50 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=833 Message from jack
Regards
Jack]]> Thu, 23 Jul 2009 01:14:14 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca FORD Mustang cabriore.
A part of these project ,around 2002,I have joined for development as designer and it was my most splendid time , cause I could spend my life in my dreamed coutry and at detroit for working in my expert field. with cadkey in my notebook by igs...
Cheer up USA , i will visit again .. please call me to your country project.
OSCA always pray and believe the survaival american automotives .
I love japanese motorcaylce and world car ,motorcycle.]]> Thu, 04 Jun 2009 07:39:20 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca I-pen total cost to tokyo was 40us$ found in ebay.
after trying few creating elemnts , I have returned to normal 3 button mouse in result. phaaaaw silly expence.]]> Sat, 30 May 2009 06:19:05 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca now I rounded angle of the monitor 90 degree, I think it s better for me to cadkey usage especially to develop motorcycle . Goood feeling. the movement of my eyes from top to bottom is healthy than horizontal direction....
ati video software was updated to this .]]> Sun, 17 May 2009 05:33:27 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=827 Message from soli_st Possibility to see the newer uploaded utilities in an additional section
different from actual sections as Keycreator 7, Keycreator 8 etc.

Solomon]]> Sat, 18 Apr 2009 02:29:08 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=328 Message from CKDExpert

Osca,
If I remember correctly, the button size is directly related to the font size in windows.


So try changing the default windows font size and see if that changes the font/button size in cadkey.

]]> Wed, 01 Apr 2009 06:35:26 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=328 Message from osca By the reason of some program source, I could not change the size.]]> Tue, 31 Mar 2009 22:51:56 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=74 Message from osca Tue, 24 Mar 2009 07:04:23 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca Fri, 20 Mar 2009 05:12:04 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca Sun, 04 Jan 2009 23:06:20 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca reason 1 ; basical, fundamental function is same to UG
reason 2 ; cadkey can move lighter , cause of without back data .
reason 3 ; cadkey is the best for creative work ,so I will continue to use cakdey by 2d 3d ,surface.
reason 4 ; two different cad soft ware makes more work in one day.
reason 5 ; cadkey can move by old ,cheap notebook.

but study is hard ,I rather want to play with girls!]]> Mon, 08 Dec 2008 21:29:22 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca cause cadkey fast surf is quite good for thinkng idea and is easy to make base data by fastsurf to ug moddeler .
I feel thinking(creative design) process and modeling is quited different.
By thsi way first design by cadkey modeling by ug by modeller , I have developped an engine for UTV .
http://brown.ap.teacup.com/applet/chairo/msgcate17/archive

Should I change the design way ?]]> Mon, 01 Dec 2008 00:43:09 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=832 Message from filesRus

Would anyone have an interest in purchasing a CDE that will generate a Standard A-Series mold base with 2-D plan views, section views and the 3-D solids for the base?  It will also help assist in pulling electrodes by automatically adding shanks to the detail part of the electrode, adding center lines to the shank and trode, and ask the user to select a face to mark with an "X".  fficeffice" />


There are many tools to help the user with as far as an organized level structure for the view and you can toggle the view via buttons in the CDE, so if you wanted to look at the front section view, you would just hit a button.  The user must place the geometry for the components onto a specific level if they want it to show up in the view.


Let me know if there is any interest out there for something like this.  Right now it is in development for KC 6.0 and KC 7.0.

Thanks for your time.Matt]]> Mon, 11 Aug 2008 17:07:55 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=823 Message from filesRus

I now have this CDE with the capability of standard A-series mold bases as well as the electrode management.  This can draw the matching 2-D views (Core Plan, Cavity Plan, Front Sect, End Sect) and 3-D solids for the selected mold base. Would anyone be interested in this? 

Matt]]> Fri, 01 Aug 2008 13:33:54 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=491 Message from SPIDER i like this A LOT BETTER.]]> Thu, 29 May 2008 10:59:24 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=827 Message from Chris edited by Chris on 6/22/2009]]> Fri, 23 May 2008 17:08:03 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=824 Message from CKDExpert

Matt,
yes, there is a Icon that looks like a mountain with the sun over it. That is how you put a picture inyour post. The one thing you need to do first is put the picture on the web some where and point to it.


Like this http://www.geotrictech.com/images/real01.jpg



Once you place the image on a server some where, any where, then you can link it to this forum.

]]> Mon, 19 May 2008 21:34:41 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=91 Message from osca I use cadkey and fst surf, then young operator make into solid by UG . the converting and transfar data makes some problems.
I once thought I should change toUG?
But for development works Cadkey is still best for me.
through this project, I myself studying fastsurf for better free surface .
Called HS500sa OSCA is cadkey is the main cad and working well to lead the project.
http://www.kozaru.us/ck/

you also see some movies by youtube.

If I can find out a suitable FEM infromation , massimo!!]]> Sun, 18 May 2008 03:21:42 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=824 Message from filesRus
Thanks,
MattMatt]]> Thu, 15 May 2008 15:24:19 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=823 Message from filesRus
Would anyone be interested in something like this ?]]> Wed, 02 Apr 2008 13:27:05 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=816 Message from Tex

I'd like to know if I could import custom textures into my Cadkey 99 program, and if so How?


Thanks


Tex

]]> Thu, 27 Mar 2008 14:54:35 GMT http://www.geotrictech.com/forum/messages.aspx?TopicID=821 Message from Chris edited by Chris on 6/22/2009]]> Sat, 15 Mar 2008 14:50:35 GMT