Store
	KXL Creator CKDExpert Book EasyBOM   FAQ Spell Checker Training Videos   Help   Use Interface   The Viewport   Edit   Create Lines   Create Circles   Create Arcs   Create Rectangles   Modify Fillets   Trim Extend   XForm   Levels   Attributes   Importing Drawings   Creating Text   Saving a File   Printing   2D Basics   Dimensioning   3D Basic Tools   3D Basic Modeling   Layout Mode   Assembles   Codec EXE Addon   Study Guide

	navigate
	Home Contact Us Store Library Forums

	KeyCreator V3 Training Video(s) - Dimensioning
	Displaying results 1-9 (of 9) First « Back1Next » Last You must sign in to purchase videos! Title : V58-Basic Dimensioning 1 Video Run Time Is : 5:20 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Set attachment and associativety >> Create associative and non associative dimensions >> Box move geometry This demonstration introduces you to setting the attachment and associativety of dimensions to geometry. Use Tools, Options, and then select the Dimension tab, select preferences then select Ok. Create dimension using Detail on the menu line, this presents pull-down options, or, select Detail on the modeling toolbar for the sub-menu choices. Box move is using Xform, Box Move, then select geometry to drag, thereby stretching or shrinking the drawing. Associative and non-associative dimensions are then created. Use the file shown below to follow along with the video. Veiw The Sample Video! Video Price : $3.00 Title : V59-Basic Dimensioning 2 Video Run Time Is : 3:59 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Set dimension attributes >> Apply dimensions to a drawing This demonstration introduces the detail settings using Detail, Detail settings, Set Attributes commands on the modeling toolbar. Dimensions are then applied to the drawing using Detail, then selecting the different dimensioning tools. Use the drawing from the previous video (Dimensioning.ckd) to follow along with the video. Veiw The Sample Video! Video Price : $3.00 Title : V60-Dimension Editing Video Run Time Is : 6:30 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Change dimension attributes >> Re-associate dimensions >> Turn off display of disassociated dimensions >> Update dimensions This demonstration introduces the detail dimension change attribute tool by selecting Detail, Detail Settings, and Change Attribute commands on the modeling toolbar use the Generic Edit tool for single editing. Use the file in the previous video (Dimensioning.ckd) after applying the dimensions, to follow along with the video. Veiw The Sample Video! Video Price : $5.00 Title : V61-Ordinate Dimensioning Video Run Time Is : 6:03 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Delete dimensions >> Create ordinate dimensioning >> Align and offset ordinate dimensions This demonstration illustrates how to delete dimension then goes on to create ordinate dimensions using Detail, Baselinear Dim in the modeling toolbar, this displays the ordinate dimensioning options. Use the file in the previous video (Dimensioning.ckd) to follow along with the video. Veiw The Sample Video! Video Price : $5.00 Title : V62-Basic Dimensioning 3 Video Run Time Is : 5:47 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Create running dimensions >> Create chain dimensions >> Create offset dimensions >> Align existing dimension >> Create parallel linear dimensions >> Create coordinate dimension This demonstration introduces running dimensions found in Detail, Baselinear Dim command in the modeling toolbar, this displays the Running options. Chain dimensioning is also used via Detail, Linear Dimension command in the modeling toolbar, this displays the Chain Dimension options. Offset and aligned dimensioning is also introduced by selecting Detail, Linear Dimension command in the modeling toolbar, this displays the Offset and Aligned options. To create parallel aligned dimensioning select Detail, Linear Dimension, And Parallel Linear. Finally, to create coordinate dimensioning select Detail, Coordinate Dimension, this brings up the dialog box to enter preferences. Use the file in the previous video (Dimensioning.ckd) to follow along with the video. Veiw The Sample Video! Video Price : $3.00 Title : V63-Notes and Symbols Video Run Time Is : 4:54 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Create detail lines >> Create local notes (labels) >> Move local notes >> Create balloon notes >> Create a note linked to a file This demonstration shows how to create detail lines by selecting Detail, Detail Lines, then select from the four options shown. Creating a local note and balloons is done by selecting Detail, Note, then choosing the Create Label or Create Balloon commands. Use the file in the previous video (Dimensioning.ckd) to follow along with the video. Veiw The Sample Video! Video Price : $3.00 Title : V64-Geometry From Notes Video Run Time Is : 3:18 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Create note using symbols >> Create geometry from note This demonstration creates a local note using with inserted symbols. Geometry is then created from an existing note by using the Burst command on the default toolbar. The demonstration goes on to create a solid model of the geometry by extrusion in the isometric view. Use the file in the previous video (Dimensioning.ckd) to follow along with the video. Veiw The Sample Video! Video Price : $3.00 Title : V65-Auto Dimensioning 1 Video Run Time Is : 4:30 Video Description: After Viewing this video and applying the demonstration you will be able to: >> Set horizontal auto dimension configuration >> Set vertical auto dimension configuration >> Set arc auto dimension configuration >> Use the mode and selection tab options >> Apply auto dimension to a drawing This demonstration sets different configurations for horizontal, vertical and arcs dimensions in conjunction with the Mode and Selection tab options. Use Detail, Auto Dim, Configure Auto Dim commands from the modeling toolbar. The video offers various dimensioned results from the different configuration settings. Use the file shown below (Auto Dim.ckd) to follow along with the video Veiw The Sample Video! Video Price : $3.00 Title : V66-Auto Dimensioning 2 Video Run Time Is : 4:42 Min. Video Description: After Viewing this video and applying the demonstration you will be able to: >> Set circle auto dimension configuration >> Set hole table auto dimension configuration >> Apply auto dimensioning to a drawing This demonstration sets different configurations for circles and hole tables in conjunction with the Mode and Selection tab options. Use Detail, Auto Dim, Configure Auto Dim commands from the modeling toolbar. The video offers various dimensioned results from the different configuration settings. Use the file from the previous video (Auto Dim.ckd) to follow along with the video. Veiw The Sample Video! Video Price : $3.00 If you Purchase the Full CD from Geotrictech.com then you will also get the online video access for free. In addition, if you purchase any of the individual videos and then decide to purchase the full CD set then we will apply the previous amount that you have already purchased towards the Price of the CD set.